Skip to Store Area:

Magento Commerce

Ammo Accessories

Items 1 to 10 of 17 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Ascending Direction
Ultra Liquid Mask 40ml
£4.75
Add to Cart
Liquid mask for covering and protecting surfaces and features when painting.
This product is ideal for the utility of masking clear parts or creating multi-colour camouflage patterns.
You can apply it with a wooden stick or a sponge to simulate chipping and wear.
Use it straight from the jar and allow it to dry approximately 20 min.
To remove, gently rub the surface until the masking is removed.
This product will not attack paint or damage delicate pieces.
Size: 40ml Learn More
Plasticator Thick
£5.25
Add to Cart
Surface preparation solution for any porous material, enabling paint adhesion to any surface.
With Plasticator products you can give any surface the texture of plastic, allowing you to paint on materials that prevent proper paint adhesion such as plaster, cardboard pieces, balsa & other woods, and laser cut paper kits.
This product seals paper parts, very porous materials such as plaster, and all types of wooden surfaces which also have porous surfaces that would otherwise absorb your paints and require large amounts just to cover the surface.
Size: 40ml Learn More
Plasticator Thin 40ml
£5.25
Add to Cart
Surface preparation solution for any porous material, enabling paint adhesion to any surface.
With Plasticator products you can give any surface the texture of plastic, allowing you to paint on materials that prevent proper paint adhesion such as plaster, cardboard pieces, balsa & other woods, and laser cut paper kits.
This product seals paper parts, very porous materials such as plaster, and all types of wooden surfaces which also have porous surfaces that would otherwise absorb your paints and require large amounts just to cover the surface.
Size: 40ml Learn More
Red Cement 30ml
£5.25
Add to Cart
Red colour extra-thin cement for use in assembling plastic scale models.
Hold the parts together, apply the cement to the joint and allow it draw itself into the gap by capillary action.
Its red colour stands out against the plastic surface, clearly showing where it is being applied.
This also allows you be sure the entire joint is covered and will facilitate the sanding process.
Completely dries in 10 minutes.
Size: 30ml Learn More
Blue Cement 30ml
£5.25
Add to Cart
Blue-colour extra-thin cement for use in assembling plastic scale models.
Hold the parts together, apply the cement to the joint and allow it draw itself into the gap by capillary action.
Its blue colour stands out against the plastic surface, clearly showing where it is being applied.
This also allows you be sure the entire joint is covered and will facilitate the sanding process.
Completely dries in 10 minutes.
Size: 30ml Learn More
Standard Cement 30ml
£5.25
Add to Cart
High-strength cement for use in assembling plastic scale models.
It is particularly useful for gluing medium-sized components that require a strong bond.
Clean the joining areas and apply the product. Clean the contact surfaces before applying the product.
This adhesive allows you to move and adjust the parts for a few seconds before it begins to harden.
Dries completely transparent in 30 minutes.
This adhesive can be easily sanded and reworked once fully cured.
Size: 30ml Learn More
Brown Anti Slip 20ml
£4.49
Add to Cart
High quality acrylic product to realistically represent non-slip surfaces in 1/35 and larger scales, as well as other rough textures of any surface type. The sand colour will be extremely useful when working on dark-coloured plastic. Apply directly from the container and spread the paste with a brush. For optimal results apply two layers, the second layer perpendicularly to the first, in order to obtain a perfectly uniform texture. This product easily adapts to your needs to create different textures by tapping the surface with a brush, a sponge, by adding water, or by building up the effect in several layers. After drying for 24 hours, this texture remains securely attached to any surface.
Colour: Brown
Size: 20ml Learn More
Black Anti Slip 20ml
£4.49
Add to Cart
High quality acrylic product to realistically represent non-slip surfaces in 1/35 and larger scales, as well as other rough textures of any surface type. The sand colour will be extremely useful when working on dark-coloured plastic. Apply directly from the container and spread the paste with a brush. For optimal results apply two layers, the second layer perpendicularly to the first, in order to obtain a perfectly uniform texture. This product easily adapts to your needs to create different textures by tapping the surface with a brush, a sponge, by adding water, or by building up the effect in several layers. After drying for 24 hours, this texture remains securely attached to any surface.
Colour: Black
Size: 20ml Learn More
Sand Anti Slip 20ml
£4.49
Add to Cart
High quality acrylic product to realistically represent non-slip surfaces in 1/35 and larger scales, as well as other rough textures of any surface type. The sand colour will be extremely useful when working on dark-coloured plastic. Apply directly from the container and spread the paste with a brush. For optimal results apply two layers, the second layer perpendicularly to the first, in order to obtain a perfectly uniform texture. This product easily adapts to your needs to create different textures by tapping the surface with a brush, a sponge, by adding water, or by building up the effect in several layers. After drying for 24 hours, this texture remains securely attached to any surface.
Colour: Sand
Size: 20ml Learn More
Acrylic Thinners 60ml
£5.75
Add to Cart
High quality thinners for acrylic paints.
Water based thinners specifically designed for use with acrylics.
Non-toxic and odorless.
Size: 60ml Learn More

Items 1 to 10 of 17 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Ascending Direction