Multi-stage speed control from 5,000 to 20,000 rpm. Suitable for smallest milling diameters.
Complete with machined base of cast iron and both vertical column and compound table of treated, quality aluminium. Play-free adjustable slides. Super stable die-cast headstock, with 24 pole balanced special motor. Super stable even at high operating speeds. For working without vibration at high speeds. This enables the use of extremely small cutters.
The triple slit, hardened steel collets cover 1.0, 1.5, 2.0, 2.4, 3.0 and 3.2 mm. Table with three milled T-slots (MICROMOT-Norm 12 x 6 x 5 mm). Adjustable ruler scale for easier positioning. Zero-adjustable hand wheels are calibrated to provide 1.0 mm per revolution, one division = 0.05 mm.
Technical data:
• 220 - 240V, 100W, 50/60Hz
• Spindle speeds: 5,000 - 20,000 rpm
• Table size: 200 x 70mm
• Travel is 134mm (x axis, 46 mm (y axis) Z (height) 80mm
• Machine base: 130 x 225mm
• Total height: 340mm
• Weight approx: 3.5Kg
• Champ blocks included
Learn More

The slim housing facilitates the grinding of long workpieces and includes an adaptor to connect a vacuum cleaner to the unit. The tool rests and eye guards are both adjustable. A spindle lock eases the changing of wheels and discs. Supplied with a 50 x 13mm corundum (grade N) and silicon carbide (soft compound) for general grinding/sharpening and hard materials respectively. The right hand spindle accepts the polishing arbour, which is supplied as standard equipment.
Technical data:
• Variable speed: 3,000 - 9,000 rpm (8-24 m/sec with standard wheels)
• Motor: 220/240V, Insulated class 2
• Wheels: 50 x 13 x 12.7mm
• Weight approx: 1.2Kg
• Size approx: 250 x 130 x 100mm Learn More

For all wood types, steel, non-ferrous metals, precious metals, plastics (also Plexiglass and glass fibre). Electronically regulated sanding speeds 250 - 800 m/min.
Powerful drive and vibration-free running thanks to balanced DC motor. Housing in glass-fibre reinforced POLYAMIDE. Aluminium table, adjustable to 50° incline downwards, 10° upwards. With angle stop. Plane sanding disc. Self-adhesive sanding discs can be removed without problems after use. Two additional quadratic silicon films ensure that used discs can be stored and reused as necessary.
For horizontal fixing (with table). But can also be fixed quickly and safely vertically. Suction channel with union to connect a vacuum cleaner for dust-free working. Each with 2 sanding discs grit 80, grit 150 and grit 240.
Technical data:
• 220 - 240V
• 140W
• 50/60Hz
• Adjustable grinding speed approx 250-800m/min ( 1,150 - 3,600rpm)
• Sanding disc Ø 125mm
• Table 98 x 140mm
• Sanding height: 62.5mm
• Size: 300 x 140 x 160mm
• Weight approx: 3Kg Learn More

Workpiece is fastened tightly and accurately with the clamp (with V slot for round profiles), with extra slot for clamping of model railway tracks up to HO gauge. Cuts close to clamp: no distorting or tilting of workpiece. Included with machine is a 50 x 1mm ceramic compound cutting disc with 10mm bore, suitable for cutting steel, non-ferrous metals as well as wooden or plastic rods. All 50mm diameter MICROMOT saw blades could also be used (spring steel, carbide). Powerful head return spring.
Technical data:
• Jaw width: 27mm
• Maximum clamping width: 20mm
• Max cutting depth: 13mm
• Mire cutting to 45°
• Double ball bearing shaft, running at 8,000rpm
• Blade speed: 20 m/s (approx)
• Motor: VDE approved 220V 85W
• Slot for rails up to HO gauge
• G-clamp included Learn More

Machined worktop of high quality, ribbed diecast aluminium (220 x 120mm). Adjustable fence with scale. Solid, hard-chromed steel, 280mm high, 20mm diameter. Super stable diecast head with VDE approved 220-240V 85W motor. Very quiet and of long life expectancy type. Power transmission by aluminium pulleys and flat belt. The spindle is essentially play-free as a result of the 3cm high quality ball bearings. Recessed spindle for the insertions of MICROMOT steel collets, but also threaded for drill chucks (3/8" thread).
• Extremely high rotational accuracy, 30mm feed
• Quill diameter: 32mm
• Throat depth: 140mm
• Max height: 140mm
• Six tripple precision collets included*
• Shaft sizes of above*: 1.0, 1.5, 2.0, 2.4, 3.2mm Learn More

The 58mm diameter Super Cut blade cuts soft woods up to 8mm, plastics (Pertinax too) to approx. 3mm, non-ferrous metals to approx. 1.5mm.
Fibreglass reinforced PC cards could be cut with the tungsten blade.
The 85W, VDE tested motor is quiet, operates off 220-240V and has a prolonged life expectancy.
The side door allows easy sawdust removal.
• Overall size approx: 240 x 180 x 80mm
• Weight: 1.8Kg
• 58mm diameter (blade) Learn More

Steel base and table with parallel action arm design which allows quick and accurate cuts. The dust blower keeps the cutting line clear and a dust extraction facility removes unwanted dust when connected to a dust extractor. The worktable tilts from 0-45°. Uses 127mm pin end fretsaw blades. Fitted with BS approved non-rewireable 3 pin moulded plug and cable.
• Maximum thickness of cut at 90°: 50mm
• Maximum thickness of cut at 45°: 20mm
• Throat depth: 400mm
• Blade length: 127mm
• Cuts per minute: 1400
• Stroke: 15mm
• Table size: 410 x 253mm
• Table tilt: 0-45°
• Base dimensions: 400 x 216mm
• Weight: 22Kg
Learn More