0ften requested, this superb looking clock really catches the eye with quartz dial, hands and brass bezel.
It has a really pleasing look, fitted with a 1.5 volt battery quartz movement. Part no BATT491.
This of course saves daily winding.

Overall size 165mm wide x 89mm deep x 185mm high.

Set of turned wooden pillars 1543/1 and Handle and plate 1543/2 available for above plan.

Learn More

0ften requested, this superb looking clock really catches the eye with quartz dial, hands and brass bezel.
It has a really pleasing look, fitted with a 1.5 volt battery quartz movement Part no BATT491.
This of course saves daily winding.
Overall size 165mm widw x 89mm deep x 185mm high.
Carriage clock design 1543 Kit contains:
* Wood panels,
* Pillars,
* Clock Movement,
* Pins,
* Glue, etc
* Including plan.
This kit does not include varnish or stain.



Learn More

Set of 4 turned wooden pillars for plan 1543P. Learn More

The design of balloon clocks reach a peak of perfection in the 18th century.
The simple but elegant lines of the period are shown in this plan.
The recommended methods of contruction are simple and as such are suited to the most basic of workshops.
The case may be finished in veneer.
Uses an easy to fit Quartz Movement 738/12 or W2114A.

Overall size: 425mm x 244mm x 134mm.
Dial / Bezel: 160mm. Learn More

The mellow, brown finish of this pine clock qualifies it for a place on a wall of antique prints and other conversation pieces.

Height; 318mm x width 318mm x depth 118mm.

Uses dial 250mm x 250mm.

Uses clock movements 738/12 or W2114.


Learn More

This beautiful reproduction clock was taken from a French antique clock.
When completed will grace any mantel piece or sideboard.
Can be fitted with a Quartz movement.
Approx. size 125mm x 89mm x 160mm high.

A kit is available 1568K2. Learn More

Based on a typical design of the period, this handsome addition to the mantle shelf may be finished in veneer, or spray painted to simulate the original alabaster.

Movement 717/1260 or W2114/500.
Dial /Bezel 160mm.

Overall size: 240mm x 140mm x 310mm (excluding eagle). Learn More

The design detailed in this plan is typical of the period.
Construction is easy, and includes a method for building the door without joints or rebates.

Overall size: 225mm x 100mm x 630mm.

Use Movement 717/1260 or W2114/500
Dial 200mm x 200mm. Learn More

Construction is simple and uses standard DIY mouldings, veneer of your choice.

Overall size: 225mm x 100mm x 553mm.

Use Movement 717/1260 or W2114/500
Dial 200mm x 200mm. Learn More