For special applications it is advantageous if the thin flowing silicon is slightly thicker.
Mix 0.3-0.6% Silcothix Thickener into the silicon paste.
It will thicken after a short reaction time.
Then mix in Silicon Vulcanizer.
This reaction causes the paste to thicken again, without changing the mould characteristics of the material after it hardens.
Size: 20ml Learn More

In order to cast extremely small and detailed or finely structured models a very liquid silicon mixture is required.
All silicon casting pastes are suited if they are first mixed with Silicon Oil Fluid.
Add 5 - 10% Silicon Oil Fluid. A shell form is also a particularly recommended choice.
Liquefy part of the silicon paste with Silicon Oil Fluid so it is thinner and smoother, then apply it to the casting model.
When this fine, elastic layer hardens, apply the casting-paste without the Silicon Oil additive as a coating and for additional support
Size: 100ml. Learn More

Ideal for mixing ceramic moulding compounds.
Size: 125mm dia x 95mm high Learn More

A two component compound similar to our "Silicone Rubber" items but, with a much lower heat resistance.
It is a softer, more flexible compound for use where there are deeper undercuts and very fine detail.
Can be used to make one or two part moulds.
Suitable for use with resins, plaster and especially suitable for use with Alumilite.
Complete with catalyst and instructions.
Not suitable for use with white metal.
Size: 500 grams Learn More

A two component compound similar to our "Silicone Rubber" items but, with a much lower heat resistance.
It is a softer, more flexible compound for use where there are deeper undercuts and very fine detail.
Can be used to make one or two part moulds.
Suitable for use with resins, plaster and especially suitable for use with Alumilite.
Complete with catalyst and instructions.
Not suitable for use with white metal.
Size: 250 grams Learn More

A two component compound similar to our "Silicone Rubber" items but, with a much lower heat resistance.
It is a softer, more flexible compound for use where there are deeper undercuts and very fine detail.
Can be used to make one or two part moulds.
Suitable for use with resins, plaster and especially suitable for use with Alumilite.
Complete with catalyst and instructions.
Not suitable for use with white metal.
Size: 1000 grams Learn More

Extra thickener for Make-A-Mould.
Used to speed up mould making.
50 ml bottle. Learn More

Mould Making Compound.
This two component, high quality mould making compound is heat resistant to 330c, has good flexibility and gives extremely good definition.
Suitabe for resins, plaster and especially white metal.
Mainly used to make 2-part moulds.
Complete with catalyst and instructions.
Size: 250g Learn More

Mould Making Compound.
This two component, high quality mould making compound is heat resistant to 330c, has good flexibility and gives extremely good definition.
Suitabe for resins, plaster and especially white metal.
Mainly used to make 2-part moulds.
Complete with catalyst and instructions.
Size: 500g Learn More