A two component compound similar to our "Silicone Rubber" items but, with a much lower heat resistance.
It is a softer, more flexible compound for use where there are deeper undercuts and very fine detail.
Can be used to make one or two part moulds.
Suitable for use with resins, plaster and especially suitable for use with Alumilite.
Complete with catalyst and instructions.
Not suitable for use with white metal.
Size: 500 grams Learn More

Size: 50mm Learn More

Size: 50mm Learn More

Size: 190 x 240mm. Learn More

250ml Resin Mixing Cup. Learn More

This is a highly stable, finely woven sackcloth which greedily absorbs liquid, easy to mould and is flexible.
It is used with modelling textile hardener, with which it is impregnated and modelled when still moist.
It can be tacked, nailed, screwed or glued.
Other materials used in modelling, such as polystyrene, paper, balsawood or cardboard, can then be attached.
The impregnating liquid also assists in gluing together the various elements when dry.
Size: 1sqm Learn More

This laminate powder is mixed in the ratio 4 parts Crealin and 1 part water and is then ready to use, after a short pre-swelling time of 2-3 minutes. It is suitable for the creation of landscape surfaces in modeling structures. The thixotrope (viscous) and creamy paste is applied with a palette knife or a putty knife. The material is dimensionally stable so that even sharp edged shapes can be formed.
Crealin cures completely within 65-75 minutes, without shrinking. It is further of advantage, that objects like small trees, fences etc., can be worked in the laminate compound; they will stick firmly in. Because the material is so easy to form and to model, it is also well suited for the making of collages. It also does bond very well with the Artex Modelling Tissues and is therefore preferred for the enhancement of laminated decoration objects (inflated swimming animals, bandaged with the modelling strips). All kinds of surface structures can be perfectly designed, e.g. scales, fur, feathering etc.) Crealin adheres on almost every subsurface, e.g. board, wood, metal, stone, plaster, gypsum, carton, polystyrene, solidified textile etc. Therefore this material is also used for the making of theatre sceneries. As the material has low adhesion properties and does not contain any dissolvers.
It can also bond with polystyrene or textile shapes (treated previoulsy with Textile Impregnating Hardener - Part No: AR77868); the objects need to be primed before with an adhesoin agent, e.g. Glass and Plastic Undercoating (Part No: AR71757) in a thin layer.
Size: 1000g Learn More

Mix the fine, light thickening powder carfully with the silicon.
It will thicken quite rapidly.
Then stir in the vulcanizer.
Thixo Thickening Powder combines well with the silicon and is a thick, lump-free and thixotrope silicon casting paste.
Additive: depends on the degree of thickness = 0.5 to 3%
Size: 30g Learn More

This separating agent is solvent-free.
It consists of wax emulsion dissolved in a watery medium for application with a paint brush and dries within 15-20 minutes.
The wax layer is then polished with a soft brush or cloth and will not be visible thereafter.
Use Emulsion Wax Separating Agent preferably on wooden parts, which you have pre-treated with varnish.
The coat of separating agent cannot be seen on the wooden parts later.
Size: 50ml Learn More