In order to cast extremely small and detailed or finely structured models a very liquid silicon mixture is required.
All silicon casting pastes are suited if they are first mixed with Silicon Oil Fluid.
Add 5 - 10% Silicon Oil Fluid. A shell form is also a particularly recommended choice.
Liquefy part of the silicon paste with Silicon Oil Fluid so it is thinner and smoother, then apply it to the casting model.
When this fine, elastic layer hardens, apply the casting-paste without the Silicon Oil additive as a coating and for additional support
Size: 100ml. Learn More

Work tools such as paint brushes etc get covered with silicon as you work with the rubber paste and must be cleaned immediately after use so the silicon does not vulcanize on the brush and make it useless.
Simply use Silicon Remover to do the chore.
Plastic mixing vessels, spoons, etc need not be cleansed.
The rubbery form skin can be peeled off these objects easily when the silicon dries.
Size: 100ml Learn More

Ideal for mixing ceramic moulding compounds.
Size: 125mm dia x 95mm high Learn More

A two component compound similar to our "Silicone Rubber" items but, with a much lower heat resistance.
It is a softer, more flexible compound for use where there are deeper undercuts and very fine detail.
Can be used to make one or two part moulds.
Suitable for use with resins, plaster and especially suitable for use with Alumilite.
Complete with catalyst and instructions.
Not suitable for use with white metal.
Size: 250 grams Learn More

A two component compound similar to our "Silicone Rubber" items but, with a much lower heat resistance.
It is a softer, more flexible compound for use where there are deeper undercuts and very fine detail.
Can be used to make one or two part moulds.
Suitable for use with resins, plaster and especially suitable for use with Alumilite.
Complete with catalyst and instructions.
Not suitable for use with white metal.
Size: 1000 grams Learn More

Extra thickener for Make-A-Mould.
Used to speed up mould making.
50 ml bottle. Learn More

Mould Making Compound.
This two component, high quality mould making compound is heat resistant to 330c, has good flexibility and gives extremely good definition.
Suitabe for resins, plaster and especially white metal.
Mainly used to make 2-part moulds.
Complete with catalyst and instructions.
Size: 250g Learn More

Mould Making Compound.
This two component, high quality mould making compound is heat resistant to 330c, has good flexibility and gives extremely good definition.
Suitabe for resins, plaster and especially white metal.
Mainly used to make 2-part moulds.
Complete with catalyst and instructions.
Size: 500g Learn More

Mould Making Compound.
This two component, high quality mould making compound is heat resistant to 330c, has good flexibility and gives extremely good definition.
Suitabe for resins, plaster and especially white metal.
Mainly used to make 2-part moulds.
Complete with catalyst and instructions.
Size: 1000g Learn More