Skip to Store Area:

Magento Commerce

Alumilite Casting Products

Welcome to the exciting world of Alumilite, the two part casting plastic that goes from liquid to solid in 3 minutes:: Allumilite is easy to use, virtually odourless, and will duplicate almost any part, down to the most minute detail. There are no complicated mixing ratios, just mix equal amounts of parts A and B, and pour into your mould. Three minutes later you will have a faithful copy of your original item. BUT..... the magic of Allumilite does not end there. Alumilite can be painted (with the minimum of preparation), machined with normal high speed tools, and can be reformed or bent ( when heated). To make the decorating process even easier, Alumilite can be dyed.. To increase the volume, or change the weight or texture of the casting, DRY fillers may be added. Suitable items listed below. Not recommended for use by persons under 14 years of age without supervision:

Items 1 to 10 of 17 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Ascending Direction
Native American Dye
£7.40
Add to Cart
Alumilite can be painted, but for ease and speed it may be better to dye it before casting. This ensures an even colour throughout your casting. Colouring dyes are mixed with the 'A' part only. Maximum amount of dye needed is 55% by volume.
Size: 30ml
Colour: Flesh (Native American) Learn More
Resin Mixing Cup
£1.40
Add to Cart
250ml Resin Mixing Cup. Learn More
Rubber/Rubber Release Agent
£5.45
Add to Cart
In the production of two or multi-part moulds, this technical vaseline is applied to the halves of the mould once they have set.
When the moulding material is then poured in the second half mould, the vaseline prevents the two mould halves from sticking together.
Size: 50 ml jar. Learn More
Modelling Clay
£1.95
Add to Cart
A non hardening clay used during the mould making process.
Can also be used for "one off" castings.
Size: 500g pack Learn More
Measuring/Mixing Cups 10x30ml
£1.20
Add to Cart
Measuring/mixing cups
Size: 30ml
Pack of 10 Learn More
Yellow Dye
£7.40
Add to Cart
Alumilite can be painted, but for ease and speed it may be better to dye it before casting. This ensures an even colour throughout your casting. Colouring dyes are mixed with the 'A' part only. Maximum amount of dye needed is 55% by volume.
Size: 30ml bottle
Colour: Yellow Learn More
Red Dye
£7.40
Add to Cart
Alumilite can be painted, but for ease and speed it may be better to dye it before casting. This ensures an even colour throughout your casting. Colouring dyes are mixed with the 'A' part only. Maximum amount of dye needed is 55% by volume.
Size: 30ml bottle
Colour: Red Learn More
Porcelain Powder
£10.80
Add to Cart
Mix with WHITE Alumilite to produce a Cold Cast Porcelain look to your castings.
Size: 450g pack Learn More
Orange Dye
£7.40
Add to Cart
Alumilite can be painted, but for ease and speed it may be better to dye it before casting. This ensures an even colour throughout your casting. Colouring dyes are mixed with the 'A' part only. Maximum amount of dye needed is 55% by volume.
Size: 30ml
Colour: Orange Learn More
Alumilite Casting Black
£47.25
Add to Cart
A 2 component product with a mixing ratio of 1.1 (i.e equal quantities of parts A&B). Supplied in two plastic bottles, complete with instructions.
Colour: Black
Total contents: 825ml Learn More

Items 1 to 10 of 17 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Ascending Direction