Welcome to the exciting world of Alumilite, the two part casting plastic that goes from liquid to solid in 3 minutes:: Allumilite is easy to use, virtually odourless, and will duplicate almost any part, down to the most minute detail. There are no complicated mixing ratios, just mix equal amounts of parts A and B, and pour into your mould. Three minutes later you will have a faithful copy of your original item. BUT..... the magic of Allumilite does not end there. Alumilite can be painted (with the minimum of preparation), machined with normal high speed tools, and can be reformed or bent ( when heated). To make the decorating process even easier, Alumilite can be dyed.. To increase the volume, or change the weight or texture of the casting, DRY fillers may be added. Suitable items listed below. Not recommended for use by persons under 14 years of age without supervision:

Items 1 to 10 of 17 total

Show 10 20 30 All per page

Page:

1. 1
2. 2
3. 

View as: Grid  List 

Sort by Position Name Price Width

Native American Dye

£7.40

Alumilite can be painted, but for ease and speed it may be better to dye it before casting. This ensures an even colour throughout your casting. Colouring dyes are mixed with the 'A' part only. Maximum amount of dye needed is 55% by volume.
Size: 30ml
Colour: Flesh (Native American) Learn More

• Add to Compare

Resin Mixing Cup

£1.40

250ml Resin Mixing Cup. Learn More

• Add to Compare

Rubber/Rubber Release Agent

£5.45

In the production of two or multi-part moulds, this technical vaseline is applied to the halves of the mould once they have set.
When the moulding material is then poured in the second half mould, the vaseline prevents the two mould halves from sticking together.
Size: 50 ml jar. Learn More

• Add to Compare

Modelling Clay

£1.95

A non hardening clay used during the mould making process.
Can also be used for "one off" castings.
Size: 500g pack Learn More

• Add to Compare

Measuring/Mixing Cups 10x30ml

£1.20

Measuring/mixing cups
Size: 30ml
Pack of 10 Learn More

• Add to Compare

Yellow Dye

£7.40

Alumilite can be painted, but for ease and speed it may be better to dye it before casting. This ensures an even colour throughout your casting. Colouring dyes are mixed with the 'A' part only. Maximum amount of dye needed is 55% by volume.
Size: 30ml bottle
Colour: Yellow Learn More

• Add to Compare

Red Dye

£7.40

Alumilite can be painted, but for ease and speed it may be better to dye it before casting. This ensures an even colour throughout your casting. Colouring dyes are mixed with the 'A' part only. Maximum amount of dye needed is 55% by volume.
Size: 30ml bottle
Colour: Red Learn More

• Add to Compare

Porcelain Powder

£10.80

Mix with WHITE Alumilite to produce a Cold Cast Porcelain look to your castings.
Size: 450g pack Learn More

• Add to Compare

Orange Dye

£7.40

Alumilite can be painted, but for ease and speed it may be better to dye it before casting. This ensures an even colour throughout your casting. Colouring dyes are mixed with the 'A' part only. Maximum amount of dye needed is 55% by volume.
Size: 30ml
Colour: Orange Learn More

• Add to Compare

Alumilite Casting Black

£47.25

A 2 component product with a mixing ratio of 1.1 (i.e equal quantities of parts A&B). Supplied in two plastic bottles, complete with instructions.
Colour: Black
Total contents: 825ml Learn More

• Add to Compare

Items 1 to 10 of 17 total

Show 10 20 30 All per page

Page:

1. 1
2. 2
3. 

View as: Grid  List 

Sort by Position Name Price Width