Propellant suitable for air-brushes, and basic spray guns.

Size: 750ml Can.

Also available in 300ml size cans. Learn More

Badger Co have called this airbrush the Anthem, because everybody is singing its praises.
A very versatile brush indeed. The new cone shaped paint tip and thinner needle replicate the more usual fine/medium/large tip/needle spray patterns.
This dual action bottom feed internal mix brush has been further refined in that the needle is now much easier to remove/replace for cleaning etc.
Contains:
• Anthem Airbrush
• 1 x 3/4 oz. Jar
• 1 x 2 oz. Jar
• Jar adaptor 1/4 oz. colour cup,
• Airbrush hanger
• Instructions
All packed in a presentation/storage case.
Air hose, regulator and propellant not included. Learn More

For close, detailed work a gravity feed airbrush is normally recommended, while for larger modelling projects a bottom feed is more suitable.
This normally means two airbrushes, or a compromise is necessary. No longer is this the case.
The 360 Universal combines the attributes of a gravity feed brush (with its low capacity colour cup) and the advantages of a side or bottom feed brush.
The front section can be rotated through 360 degrees and what was a colour cup now becomes the attachment joint for a jar adaptor. Add to this the benefits of new needle/tip technology and you have the Airbrush for all needs.
Contains:
• Model 360 Airbrush
• 2 x 3/4 oz. Jars
• Jar adaptor
• Instructions
• Packed in a plastic presentation/storage case
Air hose, regulator and propellant not included. Learn More

Low volume oil-less compressor suitable for close up detail work in a handy storage/ carry case. Lid opens to reveal cable with a non-rewireable mains plug, on/off switch and hose connector. (accepts Badger fitting) There is also provision to store your airbrush etc.
Specifications:
Power: 230 Volt 60 watt
Max. Pressure: 2.5 bar (35psi)
Airflow: 13 litres/min (0.45cfm)
Noise: 57 Db/A
Dimensions: 290mm (L) x 190mm (W) x 140mm (D)
Weight: 2kg Learn More

Model 350 conversion part.
Fine cap needle.

Other parts available. Learn More

Adaptor to connect Badger hoses to 1/4" pipe thread on compressors. Learn More

Self standing colour cups for use when spraying smaller amounts, or when you need to get closer to the work.

To fit Badger 350 only. Learn More

Suitable for use with any of the Badger Air Brushes that we sell.

Specifications:
Voltage/Amps: 230/1.4
Max Pressure: 3.5 bar/40psi
Max Inlet Air Flow: 60L/min/2 CFM
Noise: 57 Db/A
Dimensions: 170mm x 260mm x 250mm
Weight: 5.3kg

This compressor is also available with auto shut-off as product code MINIMACA.
Learn More

Suitable for use with any of the Badger Air Brushes that we sell. This unit features Auto Shut-off, and will switch off when your airbrush is not being used.

Specifications:
Voltage/Amps: 230/1.4
Max Pressure: 3.5 bar/40psi
Max Inlet Air Flow: 60L/min/2 CFM
Noise: 57 Db/A
Dimensions: 170mm x 260mm x 250mm
Weight: 5.3kg

This compressor is also available without auto shut-off as product code MINIMAC. Learn More