A beautifully crafted Nativity Scene model is the Ugears’ tribute to a beloved Christmas tradition. Carrying the true spirit of the most wonderful time of the year, this model is created to make your winter holiday really special.
Almost every country that celebrates Christmas has a tradition of installing a Nativity Scene: a display that features newborn Jesus in a stable with Mary, Joseph, an Angel, and the three wise men. In different places and settings the number of characters and approach to decorating the scene may vary, showing a host of angels, Shepherds, plenty of expensive décor, etc. Ugears created a humble and tender design implemented in wood that best celebrates the birth of the divine child of Joseph the Carpenter.
Number of components: 59
Estimated time of assembly: 1 hour Learn More

The main element of the 3D puzzle Random Generator’s design is a cube with an octahedron inside it that in its turn contains a metal ball to provide weight. This construction is powered by a rack-and-gear drive initiated manually and providing energy through a driven gear that rotates a three-axle gear. This is how the cube with all its contents begins to move, which is important for summoning the magic of randomness. Of course, we can only call it magic until we know the science of it. And to learn it, let us take a closer look at the main structure.
The vertices of the octahedron coincide with the sides of the cube. In this way as the energy of the system expires and it stops moving, gravity suspends the metal ball in the lowest part of the octahedron and due to the inclination of the walls it rolls within, it ends up in one of the octahedron’s vertices pulling in down. Whichever of the vertices turns up in the bottom, the side of the cube it is attached to will be right under it and parallel to the floor. In this way, the side of the cube with the answer will be the one facing up on the opposite side.
Model size: 173 x 122 x 132mm
Number of components: 160
Estimated time of assembly: 4 hours Learn More

The Ugears' Vintage Alarm Clock is a charming throwback, a decorative reminder of the mechanical alarm clock sitting on the bedside dresser in your parents' or grandparents' home. When you move the large gear on the side, the arrow hands of the Alarm Clock spin and the bells jangle, giving the wooden clock model its characteristic "clacking" alarm sound. While this decorative wooden model clock doesn't actually keep time, the hands of the clock are geared so that one complete rotation of the minute hand advances the hour hand one position. The clock face features design elements including the sun, plants, curlicues, and a progressing sundial, and sits atop columns that give the whole model an attractive architectural structure.
Model size: 90 x 50 x 125mm
Number of components: 43
Estimated time of assembly: 1 hour Learn More

The Old Clock Tower mini-model by Ugears brings a charming medieval atmosphere into your home or office. This beautiful DIY wooden clock tower model is a mechanical mechanism in the form of a tower with clock face, moving gears, a moving pendulum, whimsical characters, and a weather vane on top. Scroll the large gear to set the hands of the clock, the pendulum, and the weather vane in motion. The weather vane is a trumpeter holding on to a banner blowing in the wind. For comic effect, a man is suspended from the clock's spinning minute hand, holding on for dear life. Another man climbs a ladder below the clock—perhaps a cleaner or clock repairman? Behind the clock a suspicious-looking figure enters a hidden door—a thief storing his loot in the clock tower, or maybe a hunchback, bringing his lunch back? Invent your own story as you spin the gears and watch the mechanism come to life.
Model size: 200 x 97 x 52mm
Number of components: 44
Estimated time for assembly: 1 hour Learn More

Ugears' team of engineers and designers have developed a special, classic car model to take you back to that age. Outstanding features include the functional convertible folding roof with fabric overlay; latching cab doors that open to the front; the hood that opens on both sides, revealing a functional 4 cylinder engine with crankshaft; a skeuomorphic pendulum that simulates the sound of a rumbling motor; front wheels that turn using the steering wheel; and a spare wheel mounted at the back. To operate the Retro Car UGR-T, set the Start/Stop button to "Stop" as you wind the spring-powered motor using the built-in ratchet key under the chassis. Place the model on a flat surface as you hold it with one hand, press "Start," then release and watch it go. The car has Forward, Neutral, and Reverse gears.
Model size: 265 x 125 x 144mm
Number of components: 337
Estimated time of assembly: 7 hours Learn More

The Ugears Date Navigator is an interesting mechanical calendar with a beautiful Steampunk planetary mechanism inside and your daily companion to keep track of your adventure and activities in 2017-2044. It also has a sweet faint scent of wood. Just set the year and month you need and find out what day of the week it is going to be. Never get lost in time again!
The Date Navigator helps to identify the day of the week for any date from 2017 to 2044. It’s assembled without glue like all UGEARS models.
Size Model: 105 x 98 x 18mm
Number of components: 24
Estimated time of assembly: 1 hour Learn More

The Butterfly is not a static stand model, but an animated kinetic sculpture. Each of its details designed to make sure it fits its own place and plays its own part in the workings of this outstanding mechanism. Equipped with a rubber-band motor, the mechanical automaton moves imitating the flutter of a butterfly with no external power source or batteries.
As with every model in the Ugears family, The Butterfly requires no glue or additional tools to assemble. You will build your new model out of ready-made details that come precisely pre-cut in high quality natural plywood boards. Slightly pushed, the details easily pop out of the board.
The Butterfly sits on a flower-shaped platform. The elastic support slightly bounces the model, making its movements more realistic so that The Butterfly dances and flutters in the air approaching the flower.
Model Size: 290 x 550 x 400mm
Number of components: 161
Estimated time of assembly: 2 hours Learn More

Finished model sizes: Tanker 170 x 115 x 135mm.
Fire Ladder 360 x 120 x 175mm.
Chassis 225 x 110 x 105mm. Learn More

68 parts. Finished size 209 x 101 x 96mm. Learn More