For levelling of metals, construction of fittings or accurate steps. Or for production of square, hexagonal and octagonal pieces by using the dividing attachment. Learn More

UNIMAT 1 - Milling Cutter. Learn More

Extra fine nozzles for use with cyano bottles. Pack includes micro tube which permits accurate placement of cyano in hard to reach areas. Learn More

A light weight powder with very low density.
Mix with model-light epoxy/ polyester resins to give a lightweight filler.
Size: 250ml pack. Learn More

Slide Lock Pointed Tweezers feature a sharp point with a side lock.
Slide lock feature allows the user to lock at desired tension. Ultimately, personalizing the tweezer and allowing it to meet the needs of the user.
Great tool for holding electronics, paper and other small objects
Length: 120mm Learn More

Cuts matchsticks to the size you require.
Has a marked gauge for cutting all sizes.
The blade only comes into contact with matchstick when closed. Learn More

Multi-stage speed control from 5,000 to 20,000 rpm. Suitable for smallest milling diameters.
Complete with machined base of cast iron and both vertical column and compound table of treated, quality aluminium. Play-free adjustable slides. Super stable die-cast headstock, with 24 pole balanced special motor. Super stable even at high operating speeds. For working without vibration at high speeds. This enables the use of extremely small cutters.
The triple slit, hardened steel collets cover 1.0, 1.5, 2.0, 2.4, 3.0 and 3.2 mm. Table with three milled T-slots (MICROMOT-Norm 12 x 6 x 5 mm). Adjustable ruler scale for easier positioning. Zero-adjustable hand wheels are calibrated to provide 1.0 mm per revolution, one division = 0.05 mm.
Technical data:
• 220 - 240V, 100W, 50/60Hz
• Spindle speeds: 5,000 - 20,000 rpm
• Table size: 200 x 70mm
• Travel is 134mm (x axis, 46 mm (y axis) Z (height) 80mm
• Machine base: 130 x 225mm
• Total height: 340mm
• Weight approx: 3.5Kg
• Champ blocks included
Learn More

Used to profile, slot route, chamfer, trim and cut. Also used for precision details on sides and long sections, e.g doors., flaps and housing components. Powerful, dust protected motor with toothed belt drive. Double ball bearing spindle. Cutters fitted in tripple slit collets (1 each 2.4 - 3.0 and 3.2mm) are supplied.
Cutter height adjusted by means of handwheel, zero adjustable with 1 revolution = 1.0mm and 1 division = 0.05mm Stable aluminium table mitre gauge and parallel fence, as well as cutter guard and hold-down. Housing of ABS. Adaptor for vacuum cleaner, fits standard household appliances.
Technical data:
• 220 - 240V
• 100W
• 50/60Hz
• 25,000 rpm
• Table 300x 150mm
• Weight approx: 2.0Kg
Learn More

A set with with one each of the described cutters nearly arranged in a wooden box.
Used in the manufacture of picture frames, for slotting, cutting radii and other profiles.
• Shaft diameter: 3.2mm
Cutters included:
• Slot cutter Ø 3.2mm
• Slot cutter Ø 5.0mm
• Slot cutter Ø 6.4mm
• Rounding over cutter Ø 6.4mm
• V-Slot cutter Ø 6.5mm
• Combi cutter 6.5/2.5mm
• Core box bit R 3.2mm
• Rebating cutter 6.4mm
• Edge cutter with pin 5.0mm
• Half round cutter Ø 13mm Learn More