High quality acrylic product to realistically represent non-slip surfaces in 1/35 and larger scales, as well as other rough textures of any surface type. The sand colour will be extremely useful when working on dark-coloured plastic. Apply directly from the container and spread the paste with a brush. For optimal results apply two layers, the second layer perpendicularly to the first, in order to obtain a perfectly uniform texture. This product easily adapts to your needs to create different textures by tapping the surface with a brush, a sponge, by adding water, or by building up the effect in several layers. After drying for 24 hours, this texture remains securely attached to any surface.
Colour: Brown
Size: 20ml Learn More

High-strength cement for use in assembling plastic scale models.
It is particularly useful for gluing medium-sized components that require a strong bond.
Clean the joining areas and apply the product. Clean the contact surfaces before applying the product.
This adhesive allows you to move and adjust the parts for a few seconds before it begins to harden.
Dries completely transparent in 30 minutes.
This adhesive can be easily sanded and reworked once fully cured.
Size: 30ml Learn More

Blue-colour extra-thin cement for use in assembling plastic scale models.
Hold the parts together, apply the cement to the joint and allow it draw itself into the gap by capillary action.
Its blue colour stands out against the plastic surface, clearly showing where it is being applied.
This also allows you be sure the entire joint is covered and will facilitate the sanding process.
Completely dries in 10 minutes.
Size: 30ml Learn More

Red colour extra-thin cement for use in assembling plastic scale models.
Hold the parts together, apply the cement to the joint and allow it draw itself into the gap by capillary action.
Its red colour stands out against the plastic surface, clearly showing where it is being applied.
This also allows you be sure the entire joint is covered and will facilitate the sanding process.
Completely dries in 10 minutes.
Size: 30ml Learn More

Surface preparation solution for any porous material, enabling paint adhesion to any surface.
With Plasticator products you can give any surface the texture of plastic, allowing you to paint on materials that prevent proper paint adhesion such as plaster, cardboard pieces, balsa & other woods, and laser cut paper kits.
This product seals paper parts, very porous materials such as plaster, and all types of wooden surfaces which also have porous surfaces that would otherwise absorb your paints and require large amounts just to cover the surface.
Size: 40ml Learn More

Surface preparation solution for any porous material, enabling paint adhesion to any surface.
With Plasticator products you can give any surface the texture of plastic, allowing you to paint on materials that prevent proper paint adhesion such as plaster, cardboard pieces, balsa & other woods, and laser cut paper kits.
This product seals paper parts, very porous materials such as plaster, and all types of wooden surfaces which also have porous surfaces that would otherwise absorb your paints and require large amounts just to cover the surface.
Size: 40ml Learn More

Reduce the density of Enamel paints.
Commonly used when you want to apply Enamels via an Airbrush.
Thinning down of solvent-based enamel paints
Paint drying times may vary with the addition of Enamel Thinners
Size: 35ml Learn More

The new OILBRUSHER is the ultimate and revolutionary modelling product. OILBRUSHER contains high quality oil paint specifically formulated for modelling use, diluted to the perfect consistency to be applied straight from the tube. The cap has an exclusive built-in high-precision brush to apply the color directly onto your model, without having to put the oil paint on a palette or a piece of cardboard. This evolution prevents the oil from drying out and wasting product unnecessarily. Furthermore, the modern container includes a dispenser-cleaner system that removes the excess paint from the brush, leaving just the right amount in the tip. Traditional oil paint tubes were messy to use and difficult to open when the oil paint dries around the cap causing it to become stuck. This doesn´t happen with the OILBRUSHER, it is always clean and always stable. Besides all of these advantages, this revolutionary design also saves product and cost in the long run, particularly when considering OILBRUSHER is less expensive than traditional oil paints in the market.
Colour: Light Flesh
Size: 10ml Learn More

The new OILBRUSHER is the ultimate and revolutionary modelling product. OILBRUSHER contains high quality oil paint specifically formulated for modelling use, diluted to the perfect consistency to be applied straight from the tube. The cap has an exclusive built-in high-precision brush to apply the color directly onto your model, without having to put the oil paint on a palette or a piece of cardboard. This evolution prevents the oil from drying out and wasting product unnecessarily. Furthermore, the modern container includes a dispenser-cleaner system that removes the excess paint from the brush, leaving just the right amount in the tip. Traditional oil paint tubes were messy to use and difficult to open when the oil paint dries around the cap causing it to become stuck. This doesn´t happen with the OILBRUSHER, it is always clean and always stable. Besides all of these advantages, this revolutionary design also saves product and cost in the long run, particularly when considering OILBRUSHER is less expensive than traditional oil paints in the market.
Colour: Sunny Flesh
Size: 10ml Learn More