This graceful, modern harbour tug is
from the 70s. The hull is broad and
deep, fitted with a standard electric
motor. A simple layered wood
construction.
Overall Size: 450mm long, 100mm beam.
Overall height 215mm. Learn More

This 1:76 scale model of an Edwardian Paddle Steamer is typical of
the elegant Steamers used in the late Nineteenth &
Twentieth Centuries.
This type of boat was widely used for summer excursions as well as for crosschannel
& other regular services.
The hull is made from thin plywood and Balsawood which is easy to shape.
This working Paddle Steamer looks superb as an ornament when fitted in stand.
Length 655mm.
Beam 170mm. Learn More

Steam driven river launch
The hull is constructed mainly of balsa wood.
Size: 914mm long x 146mm wide x 253mm high to the top of the funnel
Plan also includes stand as shown and instructions. Learn More

Built from Balsa Wood for ease of construction and powered by a battery operated Outboard
Motor, this launch is typical of those seen on the upper reaches of the Thames and Norfolk
Broads.
Overall dimensions: 585mm x 150mm x Depth 180mm. Learn More

Scale approx. 1/82. This model is of a flat bottom Thames
Barge which worked in the London area circa 1880.
The hull is simply made by shaping a solid piece of wood marked out
from the full size details shown on drawing.
Overall size: 400mm long x 90mm wide x 375mm high. Learn More

A Fittings Kit is available 1705FK ,or individual items ,such as Steering Wheel Rim also Cones and a Figure HO6502, aswell as an Outboard Motor. Learn More

This plan incorporates three different models still using the Outboard Motor

1st Model overall size: 410mm long x 180mm wide x 120mm high.

2nd Model overall size: 390mm long x 195mm wide x 80mm high without mast.

3rd Model overall size: 410mm long x 190mm wide x 100mm high.

All can be made from thin plywood, balsawood and foam tube. Learn More

This plan is easily made from thin plywood.
The size of the boat is 330mm - including rudder long by 110mm wide by 115mm high.
Most dimensions are shown full size.
Why not give this model a finishing touch by adding the Pop-Pop type engine.
Size:
• Length: 330mm
• Width: 110mm
• Height: 115mm


Learn More

A very easily built kit for an old style steam boat propelled by a ‘POP-POP’ type engine. The kit
contains all die cut wood, engine with instructions and very easily followed boat plans. Ultra simple to
make and ideal for modellers of all ages - a super present for a young enthusiast and very attractively
packaged. Needs only glue and paint to complete as shown. Length approx. 300mm. Learn More