Skip to Store Area:

Magento Commerce

Table Top Machines

Items 1 to 10 of 18 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Ascending Direction
2 Speed Scroll Saw DSH
£244.95
Add to Cart
Super cutting capacity (wood 50mm, plastics 30mm, non-ferrous metals 10mm) and yet runs with only a hum. Air-blower with adjustable nozzle provides a clear visibility of work piece and cutting line. Machine base of cast iron for vibration-free operation and stability. Sturdy die-cast table (tilts up to 45 for mitre sawing). Twin cast iron saw over-arm with ball bearing direct drive and knob for tensioning blade. Standard commercially available pin blades can be rapidly stored in the special compartment on the side of the machine. the clamping jaws also clamp plain end blades. channel for the connection of a vaccuum cleaner. Complete with 5 each coarse and fine blades and T-allen key.
Technical data:
• 220/240 Volt
• 2 peed 9900/1500 strokes/min
• Stroke length: 19mm
• Table size: 362 x 180mm (tilts up to 45° for mitre cutting)
• Max throat depth: 400mm
• Max depth of cut: 50mm (25mm at 45° table tilt)
• Weight: 20Kg
• Size: 53 x 28 x 20cm high Learn More
Thicknesser DH 40
£599.95
Add to Cart
These characterics are essential for vibration-free, smooth thicknessing of soft and hard woods. Triple-spindled table (of die-cast aluminium, flat-milled) which can be accurately adjusted to 1/10mm by handwheel (zero adjustable). Automatic even feed with anti-kickback device: The knurled, spring-mounted infeed roller transports even irregularly shaped work pieces. A rubber-coated outfeed roller prevents marking the newly planed surface. Precision planer block with two HSS planer blades.


Infomation:

220 - 240V. 200W. 50/60Hz.
Thicknessing up to 40mm thick and up to 80mm wide.
Maximum depth of cut 0.8mm.
Cutter speed 6,000rpm.
Feed rate 4.8m/ min.
Table length 232mm.
Weight approx. 8kg. Learn More
Bench Drill
£96.25
Add to Cart
The bench drill is small and has a compact structure, it has an AC adapter and the rotating speed is adjustable. Cooling fluid is allowed to be used whilst the machine is running.
Can be used to drilliron, copper, aluminium, plastic, wood. ect Learn More
Fretsaw DS230/E - Discontinued
£169.95
Add to Cart
Technical data:
Electronically controlled stroke rate from 150-2500/min. Adjustable fence with mitre stop and scale. 220-240V motor, 85W for prolonged, quiet performance. Cuts soft wood up to 40mm, hard wood up to 10mm, plastic to approx 4mm and NF metals up to 2mm. Learn More
MBS 240/E Micro-Bandsaw - Discontinued
£359.95
Add to Cart
• Low noise
• High quality 220 - 240V motor
• Electronically controlled speed
• Ideal for fine work
• Throat depth: 150mm
• Max. workpiece height: 80mm
• Includes one 1065 x 5 x 0.4mm bandsaw blade Learn More
Variable Speed Fretsaw
£190.00
Add to Cart
Aluminium table with parallel action arm design which allows quick and accurate cuts. Incorporates a worklight and flexible shaft suitable for use with Draper Multi-tool accessories. The dust blower keeps the cutting line clear and also has a dust extraction facility. The worktable tilts from 0-45°. Uses 127mm pin and pinless fretsaw blades.

Max. thicknesss of cut at 90° - 50mm, Max. thickness of cut at 45° - 20mm, Throat depth 405mm, blade length 127mm, stroke speed 550-1600p/min, stroke 20mm. Flexible shaft speed 3000 - 10,000 rpm, table size 415 x 255mm, table tilt 0-45°, base dimensions 400 x 216mm, weight 14.6kg.
• Stroke speed: 550 - 1600 p/min
• Flexible shaft speed: 3,000 - 10,000 rpm
• Table size: 415 x 255mm
• Table tilt: 0 - 45°
• Base dimensions: 400 x 216mm
• Weight: 14.6kg
• Includes flexible drive shaft and worklight

Learn More
Speed Hobby Bench Drill
£144.71
Add to Cart
Five speed bench drill complete with 13mm capacity chuck ideally suited for the DIY and hobby user alike.
Fan-cooled induction motor. Square table with a rise and fall adjustment featuring a 0-45° tilt, left and right for ease of use.
Fitted with a BS approved non-rewireable 3 pin moulded plug and cable.
• Drilling capacity: 13mm
• Chuck capacity: 1.5 - 1.3mm
• Collar diameter: 40mm
• Speeds (r/min): 5 (600-2650)
• Swing: 208mm
• Spindle travel: 50mm
• Column diameter: 46mm
• Table size: 160 x 160mm square
• Throat depth: 100mm
• Height: 585mm
• Weight: 18Kg

Learn More
Mini Wood Lathe Variable Speed
£220.00
Add to Cart
Ideal for use on a workbench, this lathe has variable speeds allowing the user to carry out various woodturning operations.
Fitted with a 200mm swing over bed, the lathe is fitted with a no-volt overload safety switch.
Heavy duty cast iron bed. Supplied with 50mm and 150mm face plates, 175mm tool rest and 19mm drive spur.
• Turning capacity: 200mm dia (300mm between centres)
• Speeds (variable): 750-3200 rpm
• Spindle thread size: 3/4" x 16 tpi
• Spindle taper: MT1
• Overall length: 700mm
• Weight 21kg Learn More
Table Saw FET
£459.95
Add to Cart
For precise cuts without reworking. Height-adjustable, hard metal-equipped 45° tilting saw blade.
For fine mechanics, model building, mouldmaking, toy manufacture, architects, model carpenters and fitters.
For cutting wood, non-ferrous metals, plastics, plexiglass, PC-cards, foam and many other materials. Stable construction because load bearing parts and plane-milled table are made of diecast aluminium.
The micro-adjustable, precise and stable length limit stop provides decisive advantages: corrections as small as 1/10 mm can be made using an adjusting screw after coarse adjustment. The sawblade, which can be pivoted by 45°, makes the cutting of double mitres possible when used with the angle stop.
Technical data:
220 - 240 V. 7,000 rpm.
Mitre infinitely adjustable up to 45°.
Table size 300 x 300 mm.
Cutting depth 1 - 22 mm:
Sawblades from between 50 and 85 mm can be used (with 10 mm centre hole).
Weight approx. 6 kg. Learn More
Micro Shaper MT 300
£209.95
Add to Cart
Used to profile, slot route, chamfer, trim and cut. Also used for precision details on sides and long sections, e.g doors., flaps and housing components. Powerful, dust protected motor with toothed belt drive. Double ball bearing spindle. Cutters fitted in tripple slit collets (1 each 2.4 - 3.0 and 3.2mm) are supplied.
Cutter height adjusted by means of handwheel, zero adjustable with 1 revolution = 1.0mm and 1 division = 0.05mm Stable aluminium table mitre gauge and parallel fence, as well as cutter guard and hold-down. Housing of ABS. Adaptor for vacuum cleaner, fits standard household appliances.
Technical data:
• 220 - 240V
• 100W
• 50/60Hz
• 25,000 rpm
• Table 300x 150mm
• Weight approx: 2.0Kg
Learn More

Items 1 to 10 of 18 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Ascending Direction